Ok, plenty of time, then. ... and yes, I have that cable. K > Probably till the first thermal day :) > At least till march, but it should be the top priority for any cases. > Do you have the miniUSB cable? > (This type: > http://www.usb-cable.com/mini-b-usb-cables.html > ) > > Tom > > > ------------ Původní zpráva ------------ > > Od: Kuba Marek <blue.cube@xxxxxxxxx> > > Předmět: [glideplan_swproj] Re: FR device > > Datum: 21.1.2012 15:29:34 > > ---------------------------------------- > > Ok, i'm looking forward to playing with it :-) > > I'll start working on it now, there aren't any issues left for me > > anyway. How much time do I have until we have to return it? > > > > Btw virtual com port is used fairly often. It's easier for both the > > hw and sw developers to use, the only problem is that you don't > > have a simple way to tell the devices apart in the host computer. > > > > Kuba > > > > > I have borrowed LX Colibri logger from my friend. > > > I will take it at tuesday meeting and lend to Kuba. > > > Colibri has a mini-USB port for data communication - Kuba, do you > > > have a cabel for it? If not, I can lend you my own (but I use it > > > for downloading photos from camera, so if you have yours, it > > > would be better) > > > > > > One intersting thing about Colibri: It has USB, but I had to > > > install virtual COM port to communicate with it ...seems, that > > > SeeYou uses serial port communication or the communication > > > interface is the same like COM but over the USB. When I asked my > > > friend (owner of the logger), he told me that he uses SeeYou on > > > Mac (with virtual Windows) and he didn't installed any USB-COM > > > driver (but also had to use COM port). It seems that his Mac > > > already had some drivers for virtual COM port. > > > > > > Tom > > > > > > To visit archive or unsubscribe, follow: > > > //www.freelists.org/list/glideplan_swproj > > > > > > > > To visit archive or unsubscribe, follow: > //www.freelists.org/list/glideplan_swproj