- Yes I did have it running. It hooks up to the USB port. -----Original Message----- From: geocaching-bounce@xxxxxxxxxxxxx [mailto:geocaching-bounce@xxxxxxxxxxxxx] On Behalf Of Bruce S Sent: Sunday, October 03, 2004 5:47 PM To: geocaching@xxxxxxxxxxxxx Subject: [GeoStL] Re: GSAK Help - Tim, By chance did you have IntelliSync for your pda running in background. If you also sync a pda through com1 IntelliSync takes "possession" of the com port until it is close... this would give you a permission denied. Bruce >From: "Tim & Pam Ueltzen" <timpam@xxxxxxxxxxxxx> >Reply-To: geocaching@xxxxxxxxxxxxx >To: <geocaching@xxxxxxxxxxxxx> >Subject: [GeoStL] Re: GSAK Help >Date: Sun, 3 Oct 2004 13:24:48 -0500 > >- >I got it to work. >I had the baud rates set the same and nema was turned off. It still >wouldn't work so I reset XP to a previous date and now it works. > >Thanks for all of the suggestion. >Tim > >-----Original Message----- >From: geocaching-bounce@xxxxxxxxxxxxx >[mailto:geocaching-bounce@xxxxxxxxxxxxx] On Behalf Of Brad Myers >Sent: Sunday, October 03, 2004 1:08 PM >To: geocaching@xxxxxxxxxxxxx >Subject: [GeoStL] Re: GSAK Help > >- >Do you have the baud rate set the same as the baud rate on the GPS unit? >I >know Magellans can change their baud rate, but I think Garmins are >locked >in at 4800. >-----Original Message----- >From: geocaching-bounce@xxxxxxxxxxxxx >[mailto:geocaching-bounce@xxxxxxxxxxxxx] On Behalf Of Mike Lusicic >Sent: Sunday, October 03, 2004 12:38 PM >To: geocaching@xxxxxxxxxxxxx >Subject: [GeoStL] Re: GSAK Help > > >- >I don't think "Permission Denied" is that kind of error. I am with Rich. >I think Tim has a configuration problem of some sort. I am not sure if >he checked what Rich was asking about. I think he needs to see WHICH com >port the successful programs are using. Having listened to a few >customer support scenarios, when the response repeated that it worked on >the other programs, and not that he verified the configuration of the >working program, and that it did have COM1 defined as the port to use, >it at least raises the question as to whether there may have been a >miscommunication.... between the people, not the computer and GPS :-) > >tklnhl wrote: > > >- > >Sometimes, to get ours to upload we have to first download from the > >gps to > >the program THEN the computer can find it to upload. > > > >We figure this works on the "unplug it plug it back in" principle. > > > >Nancy > > > >----- Original Message ----- > >From: "Tim & Pam Ueltzen" <timpam@xxxxxxxxxxxxx> > > > > > > > >>- > >>Yes Com 1 is correct. It works with my map to show my position but it > >>won't work with GSAK or Expert GPS. > >> > >> > >> > >>>- > >>> > >>> > >>Tim, > >> > >>Are you sure COM1 is the correct port? Look at your map program for > >>transferring the maps to your GPS and see which port it uses. Mine > >>uses COM3 but all PC's are different. > >> > >> > >> > >>----- Original Message ----- > >>From: "Tim & Pam Ueltzen" <timpam@xxxxxxxxxxxxx> > >> > >> > >>>>- > >>>> > >>>> > >>>I can't get waypoints to transfer to my GPS. I get an error message > >>> > >>> > >>that > >> > >> > >>>says; MAGPROTO cannot open 'com 1' for write. Error was 'Permission > >>>Denied' > >>> > >>>I checked the baud rate they are set the same. NEMA is turned off. > >>> > >>>Can anybody help me with this? > >>> > >>>Thanks > >>>Tim > >>> > >>> > > > > **************************************** > > Our WebPage! Http://WWW.GeoStL.com > > Mail List Info. >//www.freelists.org/cgi-bin/list?list_id=geocaching > > Mail List FAQ's: //www.freelists.org/help/questions.html > > **************************************** > >To unsubscribe from this list: > > send an email to geocaching-request@xxxxxxxxxxxxx with 'unsubscribe' >in >the Subject field > > > > > > > > > > > > > > > > **************************************** > Our WebPage! Http://WWW.GeoStL.com > Mail List Info. >//www.freelists.org/cgi-bin/list?list_id=geocaching > Mail List FAQ's: //www.freelists.org/help/questions.html > **************************************** >To unsubscribe from this list: > send an email to geocaching-request@xxxxxxxxxxxxx with 'unsubscribe' in >the Subject field > > > > > > > **************************************** > Our WebPage! Http://WWW.GeoStL.com > Mail List Info. >//www.freelists.org/cgi-bin/list?list_id=geocaching > Mail List FAQ's: //www.freelists.org/help/questions.html > **************************************** >To unsubscribe from this list: > send an email to geocaching-request@xxxxxxxxxxxxx with 'unsubscribe' in >the Subject field > > > > > > **************************************** > Our WebPage! Http://WWW.GeoStL.com > Mail List Info. //www.freelists.org/cgi-bin/list?list_id=geocaching > Mail List FAQ's: //www.freelists.org/help/questions.html > **************************************** >To unsubscribe from this list: > send an email to geocaching-request@xxxxxxxxxxxxx with 'unsubscribe' in >the Subject field > > > > _________________________________________________________________ Express yourself instantly with MSN Messenger! Download today - it's FREE! hthttp://messenger.msn.click-url.com/go/onm00200471ave/direct/01/ **************************************** Our WebPage! Http://WWW.GeoStL.com Mail List Info. //www.freelists.org/cgi-bin/list?list_id=geocaching Mail List FAQ's: //www.freelists.org/help/questions.html **************************************** To unsubscribe from this list: send an email to geocaching-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field **************************************** Our WebPage! Http://WWW.GeoStL.com Mail List Info. //www.freelists.org/cgi-bin/list?list_id=geocaching Mail List FAQ's: //www.freelists.org/help/questions.html **************************************** To unsubscribe from this list: send an email to geocaching-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field