[fruityloops] Re: Cutting open hats with closed hats

  • From: "Stuart Fryett" <Stuart.Fryett@xxxxxxxxxxxxxxxx>
  • To: <fruityloops@xxxxxxxxxxxxx>
  • Date: Fri, 14 Feb 2003 13:11:54 -0000

Hi there,
Under the misc channel settings, simply set the closed hi-hat to cut itself
(so the "cut" and "cut by" are the same, eg, 1 & 1) then on the open hi-hat
channel, set the "cut" and "cut by" the same as the closed hi-hat channel.
That way, you will only ever play either an open or closed hat, with no
"bleeding" of the sound.

Hope this helps,

-----Original Message-----
From: fruityloops-bounce@xxxxxxxxxxxxx
[mailto:fruityloops-bounce@xxxxxxxxxxxxx]On Behalf Of Tim Jenkins
Sent: 14 February 2003 12:56
To: 'fruityloops@xxxxxxxxxxxxx'
Subject: [fruityloops] Cutting open hats with closed hats

Hi guys

Is there a way to cut say: open hats on one channel by closed hats on
another? Obviously this is generic to any sound but its hats I am working


Other related posts: