[foxboro] syserror 3205

Hi Guys,
We had a number of sequences  which kept producing syserrors 3205 (request 
type mismatch?) some of the sequences didn't even seem to process the 
error exception handling code, although this was present, tested and 
proven to be good. 
We recently upgraded from Mesh 8.3 (with ZCP270/CP60) to  8.4.2 . and 
reimaged the CP's. We also re-installed batchsuite (redundant), so a lot 
of possible causes....The  problem sequences hadn't been changed and were 
running fine before the upgrade. The problem seemed to be related to 2 
CP's, the others were doing fine. I couldn't pinpoint the cause. No sysmon 
errors.....Rebooting the AW70 host seemed to solve the problem for now. 
But it's not very re-assuring.... Any known problems with 8.4.2 and 
ICC/CSA etc? As far as I know the invensys engineer installed all the QF's 
so we should be up to date.

Could the problem be related to the CSA server? Other than that I wouldn't 
know what rebooting the host would solve...

Thanks & rgds,

Dirk

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: