[foxboro] rmount fails

We just copied some displays from an AW51 to a WP51 with a typical 
"blow" script, then 5 minutes later the same script failed.
Upon investigation we found that the rmount to that WP failed.  When 
we try to rmount it, nothing happens.

So we logged onto the WP itself, and typed rmount to see if it was 
rmounted to anything.  We received the following error:

LD.SO.L: rmount fatal: /usr/lib/fox/libfoxfdr.so: mprotect failed

Has anyone seen this before,  I did a little digging, but haven't 
found anything yet.

Thanks,
David

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: