[foxboro] parameter state at CP boot

I am looking for tips/feedback regarding setting parameters to a known,
safe state when a CP reboots.  For instance, we have a valve configured via
ICC such that AUTDSR = 0 and INITMA = 1.  However, the checkpoint file has
the AUTDSR = 1, which happened to be the desired valve state when the
checkpoint occurred.  When the CP reboots, the valve will be in auto and
open, which is undesirable.  I need a way to override this when the CP
reboots.

Is there any way that I can definitively tell when a CP is first
initializing/booting and explicitly override any undesirable parameters
that may be in the checkpoint file?


Steve Shimp
Maintenance & Systems Engineer
ExxonMobil Paulsboro Lube Plant
phone: 856.224.5059      cell: 609.820.8501      fax: 856.224.5030
email:  steve.shimp@xxxxxxxxxxxxxx

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: