[foxboro] how to prevent IOBAD during PT online calibration

hi sir
is there i can do to prevent FBM to report IOBAD during online PT
calibration. this PT is very critical as it is meant for gas metering -
therefore it's subjected to quarterly calibration. most of the time - it has
to be carried out during plant running. is it possible to configure ECB
block so that it will be have like PLC ie. it will store "last good value"
rather than IOBAD.

AINUDDIN ALI
CONTROL ENGINEER
PRAI POWER PLANT
350MW CCGT SINGLE SHAFT


 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: