Reading the V6.4 Enhancements and Problems Resolved document (B0400CW-A), I came across this item: 2.9.3 rsom Issues (CAR#1002094) Problem: Several rsom issues have been discovered: The m imp command, used to look at the next page of the import table, does not work. The rsom utility does not always display columns correctly. Occasionally, the idx field does not display correctly. Resolution The following rsom issues are corrected with V6.4 I/ASeries software: The rsom utility's IMP command now supports multiple page displays. The rsom utility now displays columns correctly. The idx field now displays correctly. So there you go, "m imp" never works before, and if you want it to work, get ready to upgrade. Duc -- Duc M. Do Dow Corning Corp. Carrollton Plant Carrollton, KY, US -----Original Message----- From: Joe Gale (MP) [mailto:JGALE@xxxxxxxxxxx] Sent: Friday, October 25, 2002 9:10 AM To: 'foxboro@xxxxxxxxxxxxx' Subject: Re: [foxboro] som and rsom This doesn't work, I get an error of "table expected". Any other ideas? Joe Gale DCS Administrator Boswell Energy Center Minnesota Power 1210 NW 3rd Street Cohasset, MN 55721 218-328-5036 Ext. 4611 email: jgale@xxxxxxxxxxx -----Original Message----- From: Johnson, Alex (Foxboro) [mailto:ajohnson@xxxxxxxxxxx] Sent: Thursday, October 24, 2002 11:10 AM To: foxboro@xxxxxxxxxxxxx Subject: Re: [foxboro] som and rsom more imp Is what I would expect to type, but I've never tried it. Regards, Alex Johnson Invensys 10707 Haddington Houston, TX 77063 713.722.2859 (office) 713.722.2700 (switchboard) 713.932.0222 (fax) ajohnson@xxxxxxxxxxx <mailto:ajohnson@xxxxxxxxxxx> For the latest information on ArchestrA, go to www.invensys.com/Archestra.html <http://www.invensys.com/divisions/Archestra.html> . -----Original Message----- From: Bruley, Peter [SMTP:pbruley@xxxxxxxxxxx] Sent: Thursday, October 24, 2002 11:03 AM To: foxboro@xxxxxxxxxxxxx Subject: Re: [foxboro] som and rsom How about if the system has 48 objects in the import table. (believe the imp screen shows 16rows x 3 columns) How do you see the import objects above 48? As "imp m" does NOT work. (similar to "opdb m" ? ) Peter ________________________________________________________________________ This email has been scanned for all viruses by the MessageLabs SkyScan service. For more information on a proactive anti-virus service working around the clock, around the globe, visit http://www.messagelabs.com ________________________________________________________________________ _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: http://www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave