Re: [foxboro] securing compound on/off bit
- From: "Joseph M. Riccardi" <Joe@xxxxxxxxxxxxx>
- To: <foxboro@xxxxxxxxxxxxx>
- Date: Thu, 12 Jan 2017 11:39:26 -0500
Pat,
Not intended to ignore Russ' comments but if you still want to avoid the
ACLs... Maybe consider strategically placing the IND block as the last
block in the listing order, and run it at the BPC; typically .5 seconds?
This narrows your window of opportunity to <.5 seconds. It's not perfect
but better than no other choice, at least until you get some resolution with
the suggested PER. But I would not hold your breath waiting for PER
results, especially one that affects the most common/critical block; CMP...
Joseph M. Riccardi
386-451-7607 Cell
Joe@xxxxxxxxxxxxx
"To give real service you must add something that cannot be bought or
measured with money; and that is sincerity and integrity." - Donald A. Adams
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On
Behalf Of Pat Motteshard
Sent: Thursday, January 12, 2017 10:51 AM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] securing compound on/off bit
Thanks for the feed back, I do have an IND block checking to see if the
compound is turned off and if so the IND block will turn the compound back
on but since it is a critical compound even being off for 1 or two seconds
causes equipment to shutdown. Tech support suggested a PER to possibly
modify the ON/OFF parameter to accept being tied back in on itself after I
voiced concern about using Environment ACL's but since the idea of securing
the ON/OFF bit hasn't been asked for in 2.5 decades I wonder what I am
missing?
Pat Motteshard
Searles Valley Minerals
"Joseph M. Riccardi" <Joe@xxxxxxxxxxxxx> 1/12/2017 7:35 AM >>>
Pat,
I am not exactly sure of what you are trying to accomplish but I think it is
a non-connectable but settable parameter so maybe a IND block writing the
desired value? If/When you want to override this value just transfer the
IND block to manual?
Joseph M. Riccardi
386-451-7607 Cell
Joe@xxxxxxxxxxxxx
"To give real service you must add something that cannot be bought or
measured with money; and that is sincerity and integrity." - Donald A. Adams
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [
mailto:foxboro-bounce@xxxxxxxxxxxxx] On
Behalf Of Pat Motteshard
Sent: Thursday, January 12, 2017 10:23 AM
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] securing compound on/off bit
Esteemed list,
Does anyone know of a way to secure the compound ON/OFF parameter other than
the environment ACL's? I am on a system that has rev 9.1 through 7.6 using
ICC and FoxView 10.4.2, of course the 7.6 box has Display Manager.
Thanks
Pat Motteshard
Searles Valley Minerals
_________________________________________________________________________
This mailing list is neither sponsored nor endorsed by Schneider Electric
(formerly The Foxboro Company). Use the info you obtain here at your own
risks. See the disclaimer at
https://linkprotect.cudasvc.com/url?a=https:////www.thecassandraproject.org/
disclaimer.html&c=E,1,_IxltN1iIi4GWg6KS7R9f6JXs9BWjkqlMbNU4UdSbSrWQ1vvtRwQ8H
ixcc9TlsGQTYL_rgQQ4ZPt69JwcX-fIO1seQD_CVKjGDAv9hKSg4qr568ZnWP0SkTbjA,,&typo=
1
foxboro mailing list:
https://linkprotect.cudasvc.com/url?a=//www.freelists.org/list/foxboro&;
c=E,1,zLNmMQZhAHPHqjJBbtIxJ7f65LeudDICXqCVjhmh4q0uF-ye7BnyHmuPvDlUUz6wKSvlFa
ALiqRyt9q_PTaOiv-LdOG3zE1AFL2H2YbB21YMYzSuPmf3vw,,&typo=1
to subscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
_________________________________________________________________________
This mailing list is neither sponsored nor endorsed by Schneider Electric
(formerly The Foxboro Company). Use the info you obtain here at your own
risks. See the disclaimer at
https://linkprotect.cudasvc.com/url?a=https:////www.thecassandraproject.org/
disclaimer.html&c=E,1,ql9MZ7KLCC8keCl_BlGmS0Eihw5TGA0ArhkevqS5FAl48dNDI6TDOJ
r1QvVz9fBt2PvU4pQtXWjix_XguG_ArrqfP7GKZiV4bVDQghxy&typo=1
foxboro mailing list:
https://linkprotect.cudasvc.com/url?a=//www.freelists.org/list/foxboro&;
c=E,1,wr8WwcuewShmDzhUtMmsNsmgK2jaDDrdv0IeFVkVY1rC88H_X6jvc0b0qgxnHK6mqNHJ30
5UzKV1yoB9tsL_9KaGnLO3_hZyyXNlnDhx&typo=1
to subscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
_________________________________________________________________________
This mailing list is neither sponsored nor endorsed by Schneider Electric
(formerly The Foxboro Company). Use the info you obtain here at your own
risks. See the disclaimer at www.thecassandraproject.org/disclaimer.html
foxboro mailing list:
//www.freelists.org/list/foxboro
to subscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
_________________________________________________________________________
This mailing list is neither sponsored nor endorsed by Schneider Electric
(formerly The Foxboro Company). Use the info you obtain here at your own
risks. See the disclaimer at www.thecassandraproject.org/disclaimer.html
foxboro mailing list:
//www.freelists.org/list/foxboro
to subscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
