Re: [foxboro] scopen error

Dear Kevin,

We used FOXTST utility and found that our FOXAPI version is :
FOX API Version 4.2.5 Copyright (c) Foxboro 1992-1999
Toolkit is SUNSPARC

But this error appears at FOXBAIS.OUT when I built a PI tag with string =
value appropiated to the DCS tag with parameter SN=20
[i.e. COMPOUND:BLOCK.PARAMETER].
I think not related to boolean/long package.

Also, I couldn't find this message in FOXAPI.LOG

any suggestions ?

regards,
edyk

-----Original Message-----
From: Kevin FitzGerrell [mailto:fitzgerrell@xxxxxxxxxxxxxxx]
Sent: Monday, June 30, 2003 9:26 PM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] scopen error


As I recall, error 36 (invalid type) was due primarily to trying to =
write to
packed boolean and packed long with older FoxAPI versions.  What version =
of
FoxAPI are you using?  I believe the problem was corrected in 4.2.4.

Look at the foxapi.log file (should be in /opt/fox/ais/bin) and see if =
you
are getting error messages.  Check the validity and status of points =
showing
up in this log file.


Regards,

Kevin FitzGerrell
Systems Engineer
Foxboro New Zealand
+64 9 573 7690

----- Original Message -----
From: <Edy_Kurniawan@xxxxxxx>
To: <foxboro@xxxxxxxxxxxxx>
Sent: Monday, June 30, 2003 7:08 PM
Subject: [foxboro] scopen error


> Dear members,
>
> We got an error :
> [scopen] Error 36 opening PILIST02L60 [dset 0, scan=3D3D8, rw=3D3D1]
>
> How we use the FOXTST to find out what the problem currently exist ?
> We've tried to use the FOXSPY utility but we didn't know the steps to =
do =3D
> that.
>
> Would you please, to help us.
>
> sincerely,
>
> =3DE9dy kurniawan
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: