Re: [foxboro] save_all scripts (was: Backup strategies - Best Practices?)

Have you done this (load not loadall) off a hard drive ?

-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of Jeremy Milum
Sent: Thursday, January 29, 2009 5:15 pm
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] save_all scripts (was: Backup strategies - Best
Practices?)

On Thu, Jan 29, 2009 at 4:02 PM, Ron Deen <r.deen@xxxxxxxxx> wrote:
> No, an initialise is not mandatory but on the other hand, usually you
perform
> a load_all to get a clean start so it would make sense in general.

but a load_all can be used to load just certain compounds into a CP. i
actually do this
a lot more often than initializing and loading a complete saveall into a
CP
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
 
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: