Re: [foxboro] rmount fails
- From: "Johnson, Alex P \(IPS\)" <alex.johnson@xxxxxxxxxxxxxxxx>
- To: <foxboro@xxxxxxxxxxxxx>
- Date: Wed, 24 Jan 2007 11:08:42 -0500
rmount does control data flow to avoid problems.
Regards,
=20
Alex Johnson
Invensys Systems, Inc.
10900 Equity Drive
Houston, TX 77041
713.329.8472 (voice)
713.329.1700 (fax)
713.329.1600 (switchboard)
alex.johnson@xxxxxxxxxxxxxxxx
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of David Johnson
Sent: Wednesday, January 24, 2007 4:04 PM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] rmount fails
Hey Jeremy.
I thought that rmount throttled back the amount of traffic put on the=20
nodebus, whereas rcp doesn't. Remember I work a lot of places and=20
not everyone had the foresight, intelligence, or money that it took=20
to put second ethernet cards in all the Sun boxes. So we play the=20
hand we are dealt.
David
At 09:50 AM 1/24/2007, you wrote:
>On 1/24/07, David Johnson <drjohn@xxxxxxxxxx> wrote:
> > We just copied some displays from an AW51 to a WP51 with a typical
> > "blow" script, then 5 minutes later the same script failed.
> > Upon investigation we found that the rmount to that WP failed. When
> > we try to rmount it, nothing happens.
>
>change the blow script to use rcp instead or rmount. rmount is nasty.
>
>
>_______________________________________________________________________
>This mailing list is neither sponsored nor endorsed by Invensys Process
>Systems (formerly The Foxboro Company). Use the info you obtain here at
>your own risks. Read http://www.thecassandraproject.org/disclaimer.html
>
>foxboro mailing list: http://www.freelists.org/list/foxboro
>to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoi=
n
>to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleav=
e
>
=20
=20
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
=20
foxboro mailing list: http://www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave
=20
Confidentiality Notice: =0AThe information contained in this electronic m=
essage and any attachment(s) to this message are intended for the exclusi=
ve use of the recipient(s) and may contain confidential, privileged or pr=
oprietary information. If you are not the intended recipient, please noti=
fy the sender immediately, delete all copies of this message and any atta=
chment(s). Any other use of the E-Mail by you is prohibited.=0A
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: http://www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
- References:
- [foxboro] rmount fails
- From: David Johnson
- Re: [foxboro] rmount fails
- From: Jeremy Milum
- Re: [foxboro] rmount fails
- From: David Johnson
Other related posts:
- » Re: [foxboro] rmount fails
- » Re: [foxboro] rmount fails
- » Re: [foxboro] rmount fails
- » Re: [foxboro] rmount fails
- » Re: [foxboro] rmount fails
- » Re: [foxboro] rmount fails
- » Re: [foxboro] rmount fails
- » Re: [foxboro] rmount fails
- » Re: [foxboro] rmount fails
- [foxboro] rmount fails
- From: David Johnson
- Re: [foxboro] rmount fails
- From: Jeremy Milum
- Re: [foxboro] rmount fails
- From: David Johnson