Re: [foxboro] possible to directly get source, rather than point valu e?


Jason,

This is probably not quite what you were looking for, but the dmcmd command
"source" will load a C:B.P's source into the display manager variable
"FOX2", ie:
     pref -AW51B1 dmcmd 'source "TEST:ALM1.MEAS"'
will load this parameter's source in FOX2 and will open the sink/source
overlay.
     pref -AW51B1 dmcmd 'msglin "$FOX2"'
will display the source to the message line.

Unfortunately (in this case), "source" also opens up the source overlay in
the upper left corner of the display.

Regards,

Kevin FitzGerrell
Systems Engineer
Foxboro New Zealand
------------------------------------
Tel:  +64 (9) 573 7690
Fax:  +64 (9) 573 7691


                                                                                
                
                    "Turner, Jason"                                             
                
                    <Jason.Turner@chh.       To:     "'foxboro@xxxxxxxxxxxxx'"  
                
                    co.nz>                    <foxboro@xxxxxxxxxxxxx>           
                
                    Sent by:                 cc:                                
                
                    foxboro-bounce@fre       Subject:     [foxboro] possible to 
directly get    
                    elists.org                source, rather than point valu   
e?               
                                                                                
                
                                                                                
                
                    25/03/2002 01:21                                            
                
                    PM                                                          
                
                    Please respond to                                           
                
                    foxboro                                                     
                
                                                                                
                
                                                                                
                





Is there an omget (or similar) equivalant that finds the source of a
connection?  In other words, if we have two blocks,
comp:sink and comp:souce, and comp:sink.in has comp:source.out as its input
connection, is there a way to determine this from the command line, without
parsing iccprt output?

Cheers

Jason







 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: