I think these are not supported in "getpars" Only "DESCRP" and "TYPE" strings
parameters are supported by this utility.
Best regards
Harshad Viradia
"Perez, Claudio" <CPerez@xxxxxxxxxxxxxxxx> on 10/31/2001 05:03:39 PM
Please respond to foxboro@xxxxxxxxxxxxx
To: "'foxboro@xxxxxxxxxxxxx'" <foxboro@xxxxxxxxxxxxx>
cc: (bcc: Harshad Viradia/JAMNAGAR/RIL)
Subject: [foxboro] getpars tool
Hi list,
We are using the command getpars to query the CSA database but
asking for some blocks does=B4nt work. The command we use is:
getpars -UCP0901 -tCIN -mNM0:%-10.10s -mNM1:%-10-10s=20
but, although the command is correct, we got NA for NM0 and NM1.
Any idea?
Regads
Claudio A. Perez
DCS Engineer
PROFERTIL S.A.
___________________________________________________________________
This list is neither sponsored nor endorsed by The Foxboro Company.
Use the information obtained here at your own risk. For disclaimer,
see http://www.thecassandraproject.org/disclaimer.html#maillist
list info: http://www.freelists.org/list/foxboro
subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
___________________________________________________________________
This list is neither sponsored nor endorsed by The Foxboro Company.
Use the information obtained here at your own risk. For disclaimer,
see http://www.thecassandraproject.org/disclaimer.html#maillist
list info: http://www.freelists.org/list/foxboro
subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave