Actually, it was a bad place to put it.
I usually use / for this log file on my machine, but I got sloppy. Good
catch.
How about this:
#!/bin/sh
exec >/etc/rc2.d/log.S99FOXBORO 2>&1
set -x
Regards,
Alex Johnson
Invensys
10707 Haddington
Houston, TX 77063
713.722.2859 (office)
713.722.2700 (switchboard)
713.932.0222 (fax)
ajohnson@xxxxxxxxxxx <mailto:ajohnson@xxxxxxxxxxx>
For the latest information on ArchestrA, go to
www.invensys.com/Archestra.html
<http://www.invensys.com/divisions/Archestra.html> .
-----Original Message-----
From: Heath, Graham [SMTP:gheath@xxxxxxxxxxx]
Sent: Wednesday, December 11, 2002 10:46 AM
To: 'foxboro@xxxxxxxxxxxxx'
Subject: Re: [foxboro] foxmonitor startup problems
Maybe not such a good idea to use a log file name with a capital 'S'
at the next boot (or maybe even the same boot ) /etc/rc2 will
attempt to
execute it.
regds
Graham M. Heath - EMEA TAC
Europe, Middle East & Africa Technical Assistance Centre
Invensys Process Systems
E-Mail ips_emeatac@xxxxxxxxxxx
Internet www.ips.csc.invensys.com
Intranet http://eurocsc-161-web:81
Tel +44 (0)1293 406508
Fax +44 (0)1293 417726
>
>Add the following lines to S99FOXBORO
>
>#!/bin/sh
>mkdir -p /etc/rc2.d
>exec >/etc/rc2.d/S99FOXBORO.log 2>&1
>set -x
>
>Reboot and take a look in the log file (/etc/rc2.d/S99FOXBORO.log).
It
>might
>tell you something. I have my S99FOXBORO's setup this way.
>
>Regards,
>
>Alex Johnson
>Invensys
>10707 Haddington
>Houston, TX 77063
>713.722.2859 (office)
>713.722.2700 (switchboard)
>713.932.0222 (fax)
>ajohnson@xxxxxxxxxxx <mailto:ajohnson@xxxxxxxxxxx>
>For the latest information on ArchestrA, go to
>www.invensys.com/Archestra.html
><http://www.invensys.com/divisions/Archestra.html> .
>
>
> -----Original Message-----
> From: Murray, Steve [SMTP:SMurray@xxxxxxxxxx]
> Sent: Tuesday, December 10, 2002 4:08 PM
> To: Foxboro (E-mail)
> Subject: [foxboro] foxmonitor startup problems
>
> Anyone know why foxmonitor would not start all of it's parts
>properly on
> bootup?
>
> I have a AW51E that does not boot all the way. S99FOXBORO
does
>not finish
> and foxmonitor will start some processes successfully but
several
>others
> show as defunct processes.
>
> I have had problems with this for a few days, and I have
been able
>to get
> it to boot every time if it is not connected to the nodebus,
but
>sometimes
> it won't boot when connected.
>
> When this happens a remote user can login via telnet on
the second
> ethernet port (and even get a Display Manager), but the
primary head
>never
> gets a display manager because of the incomplete boot.
>
> I have swapped out the AW51 with a spare that does the
same thing
>(using
> the same hard drive and nodebus cabling though).
>
> fsck does not show any disk errors, and the disk does not
seem to
>have any
> full partitions. Yesterday I got the AW to boot up
entirely, but
>today it
> spontaneously rebooted about 30 minutes ago and did not come
>completely up.
>
> Thanks for any ideas,
>
> Steve Murray
> Asarco
>
>
> *
>
>
_________________________________________________________________
Add photos to your e-mail with MSN 8. Get 2 months FREE*.
http://join.msn.com/?page=features/featuredemail
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys
Process
Systems (formerly The Foxboro Company). Use the info you obtain here
at
your own risks. Read
http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list:
http://www.freelists.org/list/foxboro
to subscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys
Process
Systems (formerly The Foxboro Company). Use the info you obtain here
at
your own risks. Read
http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list:
http://www.freelists.org/list/foxboro
to subscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: http://www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave