Re: [foxboro] foxboro Digest V8 #373

In a message dated 11/12/2008 00:04:53 Mountain Standard Time,  
foxboro@xxxxxxxxxxxxx writes:
In  recent versions of I/A, you don't need a script to do
autocheckpointing -  just turn it on in your control stations.



I should have said semi-autocheckpointing.  It was decided that  a human hand 
needed to be in the loop, so once a shift I have little screens  popping up 
for each unit (1-3 CP's each) that require an operator's approval to  go ahead 
and do the checkpoint.  Therefore the built-in autocheckpointing  option is 
not applicable.
 
RGC
12803 Josey Creek Ct.
Cypress, TX 77433
713-805-8742  cell
281-256-1111 home office/FAX
281-256-1333  home
**************Get the Moviefone Toolbar. Showtimes, theaters, movie news & 
more!(http://toolbar.aol.com/moviefone/download.html?ncid=emlcntusdown00000001)


 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: