Re: [foxboro] foxboro Digest V8 #357

In a message dated 10/29/2008 11:41:53 Central Daylight Time,  
foxboro@xxxxxxxxxxxxx writes:
Make  sure you're creating the block in the continuous control section of
the  compound


The compound already has working blocks in the control section, and I  am 
trying to insert a RIN block between two of those blocks to feed the related  
AIN.
 
Your ICC pdef/olist files do not support that  block type...

What is the version of I/A on the host?
 
The new engineering station is  running 7.0, but it also doesn't work on 
another station running 7.1.1.   The old engineering station was running 6.1.2. 
 
Incidentally, I had to copy  "rcopy" from the old station as the new one didn't 
come with it.  Also got  some funky FoxDraw messages.  And this was a Foxboro 
 install.
 
 
RGC
12803 Josey Creek Ct.
Cypress, TX 77433
713-805-8742  cell
281-256-1111 home office/FAX
281-256-1333  home
**************Plan your next getaway with AOL Travel.  Check out Today's Hot 
5 Travel Deals! 
(http://travel.aol.com/discount-travel?ncid=emlcntustrav00000001)


 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: