Re: [foxboro] foxboro Digest V8 #278

In a message dated 8/23/2008 01:04:01 Central Daylight Time,  
foxboro@xxxxxxxxxxxxx writes:
we've  been somewhat reluctant to build our own details and  faceplates


Corey, don't be afraid to roll your own faceplate templates.   When we went 
to the new Windows/Mesh system, I found the standard templates  delivered to be 
dismally substandard, so we converted all of our customized  templates from 
the Solaris side.  I don't know whether Foxboro has yet  fixed all the "new" 
templates, but just try looking at all your points on an  FBM219, 41C or 07B 
for 
starters.  Our CARS on this have been generally  ignored.
 
Of course anything you build that you want to take precedence should be  
placed in a specific directory and referred to by the graphics  directly.  We 
use 
/opt/customer/displib/Overlays.
 
RGC
12803 Josey Creek Ct.
Cypress, TX 77433
713-805-8742  cell
281-256-1111 home office/FAX
281-256-1333  home



**************It's only a deal if it's where you want to go. Find your travel 
deal here.      
(http://information.travel.aol.com/deals?ncid=aoltrv00050000000047)


 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: