Re: [foxboro] foxboro Digest V8 #274

In a message dated 8/19/2008 01:04:12 Central Daylight Time,  
foxboro@xxxxxxxxxxxxx writes:
Any  extraneous blocks connected to the output or feedback; except  the
AOUT?

OK, I confess, its late and I've been working too many hours.  Turns  out my 
FBK was connected to valvename.CALCO instead of valvename.BCALCO.   Weird 
thing is there was no cyan on either block, which was slow to clear  previously 
because the PIDA and AOUT blocks are unavoidably in different  CP's.
 
If you ever need a controller with a built-in offset...
 
Thanks, Mr. Riccardi.  Rick

 
RGC
12803 Josey Creek Ct.
Cypress, TX 77433
713-805-8742  cell
281-256-1111 home office/FAX
281-256-1333  home



**************It's only a deal if it's where you want to go. Find your travel 
deal here.      
(http://information.travel.aol.com/deals?ncid=aoltrv00050000000047)


 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: