Re: [foxboro] foxboro Digest V8 #220

 
 
In a message dated 6/27/2008 01:24:06 Central Daylight Time,  
foxboro@xxxxxxxxxxxxx writes:
DOFF M03  ; this is your timeout period after which you assume that if the
number  hasn't changed, then your counter must not be counting


Has anyone run into a problem with a DON timer not resetting;   ie, the first 
time through it counts down fine and flips a bit.  The second  time the 
trigger condition occurs, the bit flips with no delay.  This is on  an I/A ver. 
6.1.2 system.  Thanks in advance.
 
RGC
12803 Josey Creek Ct.
Cypress, TX 77433
713-805-8742  cell
281-256-1111 home office/FAX
281-256-1333  home



**************Gas prices getting you down? Search AOL Autos for 
fuel-efficient used cars.      
(http://autos.aol.com/used?ncid=aolaut00050000000007)


 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: