Re: [foxboro] foxboro Digest V8 #150

 
 
In a message dated 4/29/2008 17:08:05 Central Daylight Time,  
foxboro@xxxxxxxxxxxxx writes:
Are there more options for IOMOPT than the standard 0,1,3  ?


Yes, IOMOPT = 2 lets the block listen to whatever number or connection you  
put on the MEAS parameter at the bottom.  And yes, a lot can be done with  
KSCALE and BIAS (standard procedure for reading J themocouples which arrive in 
C  
where most of us want to display in F.  The funny thing I've found about  
scaling, however, is that (and I may have this backwards) the alarming and  
ranging are based on the output units, not the input units, so you kind of have 
 to 
watch that.

 
RGC
12803 Josey Creek Ct.
Cypress, TX 77433
713-805-8742  cell
281-256-1111 home office/FAX
281-256-1333  home



**************Need a new ride? Check out the largest site for U.S. used car 
listings at AOL Autos.      
(http://autos.aol.com/used?NCID=aolcmp00300000002851)


 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: