Re: [foxboro] foxboro Digest V4 #419

 
In a message dated 12/15/04 11:21:36 AM Mountain Standard Time,  
foxboro@xxxxxxxxxxxxx writes:
The  problem is reproducible by running a loadall on a test system.  
>  Once = a GDEV was frozen, rebooting the CP would not unfreeze it.  It  
> 


Rick - whenever I am messing with a block's autsw and locsw settings in an  
automated manner, I try to do one move at a time, ie move the locsw from 1 to 0 
 first, then next execution move the autsw from 0 to 1, then move locsw (if  
desired) back to 1, etc.  It's good to keep parameter priority in mind  also.


 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: