Re: [foxboro] flow meter

Re: Check with an Emerson/Rosemount Rep and they will steer you in the
right direction.

Ouch!

You could also talk to your IPS Client Sales Executive or our local M&I
representative.

Where are you physically, Dirk?

Regards,
 
Alex Johnson
Invensys Process Systems
10900 Equity Drive
Houston, TX 77041
713 329 8472 (desk)
713 329 1600 (operator)
713 329 1944 (SSC Fax)
713 329 1700 (Central Fax)
alex.johnson@xxxxxxxxxxxxxxxx

-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of Jenckes, Jim R.
Sent: Friday, January 30, 2009 10:52 AM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] flow meter

Dirk,
Check with an Emerson/Rosemount Rep and they will steer you in the right
direction.

Jim Jenckes, CCST
Process Control Specialist
Tesoro Alaska Company
P.O. Box 3369
Kenai, AK 99611
907-776-3865
907-776-3863 Fax
 
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of dirk.pauwels@xxxxxxxxxx
Sent: Friday, January 30, 2009 7:33 AM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] flow meter

Hi Ken,

Seemed strange to me to, but then again  I have no experience with flow
meters. My collegues from process design and mechanical engineering
talked
to yokogawa , but I don't know which type they discussed. I'll ask them
monday and let you know

thanks & Regards

Dirk



 

             "Moore, Kenneth,

             Celanese/US"

             <ken.e.moore@cela
To 
             nese.com>                 <foxboro@xxxxxxxxxxxxx>

             Sent by:
cc 
             foxboro-bounce@fr

             eelists.org
Subject 
                                       Re: [foxboro] flow meter

 

             30/01/2009 17:27

 

 

             Please respond to

             foxboro@freelists

                   .org

 

 





This seems strange, we have many many flow meters, all the name brands
typically do either 4-20mA, pulse or both (configurable).
I have never encountered a "quality" meter that would not do 4-20mA.

What type of flow meter technology are you looking at?
Magnetic, DP, Vortex, Thermal, etc...


Ken Moore
Celanese


-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of dirk.pauwels@xxxxxxxxxx
Sent: Friday, January 30, 2009 11:04 AM
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] flow meter


Hi guys,

Just wondering if any of you are using flowmeters in your piping and
which type you have good experiences with. We're thinking on installing
a Flowmeter in an oil header. We haven't got flowmeters for the moment,
our products usually are not suited for flowmeters. Except for the oil
headers.
We usually work with loadcells but for this project we would need a
flowtransmitter.
Problem seems to be these flowmeters don't transmit 4-20 ma but pulses.
Our DCS can't handle the number of pulses per second, so we'll need a
seperate controller. Are there any flowmeters (2" pipe) that transmit
4-20ma?

Thanks & Rgds

Dirk



_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html

foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave



_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html

foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave



 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
 
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
 


* Confidentiality Notice:
This e-mail and any associated files are intended solely for the individual or 
entity to whom they are addressed. Please do not copy it or use it for any 
purposes, or disclose its contents to any other person. Further, this e-mail 
and any associated files may be confidential and further may be legally 
privileged. This email is from the Invensys Process Systems business unit of 
Invensys plc which is a company registered in England and Wales with its 
registered office at Portland House, Bressenden Place, London, SW1E 5BF 
(Registered number 166023).  For a list of European legal entities within the 
Invensys Process Systems business group, please click here 
http://www.invensys.com/legal/default.asp?top_nav_id=77&nav_id=80&prev_id=77.

If you have received this e-mail in error, you are on notice of its status. 
Please notify us immediately by reply e-mail and then delete this message from 
your system. Thank you for your co-operation. You may contact our Helpdesk on 
+44 (0)20 7821 3859 / 2105 or email inet.hqhelpdesk@xxxxxxxxxxxxx This e-mail 
and any attachments thereto may be subject to the terms of any agreements 
between Invensys (and/or its subsidiaries and affiliates) and the recipient 
(and/or its subsidiaries and affiliates).


 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: