Re: [foxboro] flat screens on AW51 / WP51
- From: "Corey R Clingo" <clingoc@xxxxxxxxxxxxx>
- To: foxboro@xxxxxxxxxxxxx
- Date: Wed, 2 Feb 2005 16:58:58 -0600
We tried a NEC 2080UX (the current Foxboro 20" offering) on a WP30. It
works fine. Colors are brighter, and the slower response of the LCD
appears to mitigate the WP30's characteristic flickering somewhat.
Resolution is not increased, of course, but the NEC does a good job of
stretching the WP30's 640x480 image across its 1600x1200 pixels.
Corey Clingo
BASF Corp.
brad.s.wilson@xxxxxxxxxxxxxx
Sent by: foxboro-bounce@xxxxxxxxxxxxx
02/02/2005 03:00 PM
Please respond to foxboro
To: foxboro
cc:
Subject: Re: [foxboro] flat screens on AW51 / WP51
Thank you for the rapid replies ... a couple more further questions, if
you
don't mind ...
I assume all these LCD monitors have a standard 15-pin connector, right?
(That's what the spec sheets seem to indicate.) So I would need a pigtail
to plug in my RGB cable.
How about flat-screens on WP30s?
Brad Wilson
ExxonMobil Chemical Co
Edison Synthetics Plant
732-321-6115
732-321-6177 fax
Brad.S.Wilson@xxxxxxxxxxxxxx
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
