Re: [foxboro] dump alarm states

Jaime,
   There are "pref" commands that allow the lights on the annunciator to 
be turned on, flash, or turn off.

   The syntax for changing the light state is:
        pref -WPLBUG dmcmd "annun panel# button# state"
        where panel# is the annunciator panel# (note that the first 
annunciator keyboard has panels 1-3, the second keyboard has panels 4-6, 
etc)
                button# is the button number (1-16) within the panel
                state is the desired light state:       5=flash, 4=off, 
3=on 
 
   To reset particular light:
        pref -WPLBUG dmcmd "annun 1 2 4"
   This would take the light on Panel 1 Button 2 and turn if OFF

    I hope this helps


Kurt Russell

Project Engineer
Forteo Process Automation (KYJ03)
Phone: 317-277-1008  Fax: 317-277-9270
Mobile: 317-997-5715
krussell@xxxxxxxxx 
------------------------------------------------------------------------------
KY/358/01, Drop Code 3418
Technology Center North, United States of America
www.lilly.com 

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: