Re: [foxboro] dmp0_8MM script on AW51E

Dear Steve,

Exactly! Because you have 51E's you should NOT use the antique =
dump0-8mm
stuff. The QF uses the relevant drivers for the relevant 50 series =
stations
(yes, for 50, 51A, 51B, 51B1, 51C, 51D, 51E and 51E1 !! WP's, AP's as =
well
as AW's - mirrored and/or concatenated drives as well as RAID 1 and 5
drives, the QF covers it all as long as you are on I/A version 4.3 or
higher)
However, I agree, Foxboro/Invensys has done a very poor job in relation =
to
making you, our customers, aware of this QF.
Although not optimal yet, it is a significant step forward in the
backup/restore procedure for the 50 series.
As my P.I.C. (Partner In Crime) Ron Deen already indicated, get the QF =
from
the CSC web site and get familiar with its usage. All comments are =
welcome
and should result in an even better version in the near future.

Sorry for letting you (and many others) struggle with the old stuff for =
such
a long time.

Best regards,

        Ren=E9 Bakker - EMEA TAC=20
                Europe, Middle East & Africa Technical Assistance Centre
                Invensys Process Systems
                E-Mail  eurotac@xxxxxxxxxxx
                Internet        www.csc.foxboro.com
                Tel     +31 (0)35 54 84125
=20
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: