Re: [foxboro] dmp0_8MM script on AW51E

Hi John,

  I feel your pain!

  When I set up an AW51E I had the same problem.  I edited my S99FOXBORO
file to link rst9 to rst28 instead of 29 to get it to work.  I later found a
better way of dealing with this but never implemented it.

Here are my linkages:

2CCAW3# ls -l /dev/rst*
lrwxrwxrwx   1 root     root           9 Mar 30  2001 /dev/rst0 -> /dev/rst4
lrwxrwxrwx   1 root     root           7 Mar 30  2001 /dev/rst12 -> rmt/0mb
lrwxrwxrwx   1 root     root           7 Mar 30  2001 /dev/rst20 -> rmt/0hb
lrwxrwxrwx   1 root     root           7 Mar 30  2001 /dev/rst28 -> rmt/0cb
lrwxrwxrwx   1 root     root           7 Mar 30  2001 /dev/rst4 -> rmt/0lb
lrwxrwxrwx   1 root     root          10 Apr  4  2001 /dev/rst9 ->
/dev/rst28
2CCAW3# ls -l /dev/nrst*
lrwxrwxrwx   1 root     root          10 Mar 30  2001 /dev/nrst0 ->
/dev/nrst4
lrwxrwxrwx   1 root     root           8 Mar 30  2001 /dev/nrst12 ->
rmt/0mbn
lrwxrwxrwx   1 root     root           8 Mar 30  2001 /dev/nrst20 ->
rmt/0hbn
lrwxrwxrwx   1 root     root           8 Mar 30  2001 /dev/nrst28 ->
rmt/0cbn
lrwxrwxrwx   1 root     root           8 Mar 30  2001 /dev/nrst4 -> rmt/0lbn
lrwxrwxrwx   1 root     root          11 Apr  4  2001 /dev/nrst9 ->
/dev/nrst28
2CCAW3# 

Stephen Murray
Asarco

-----Original Message-----
From: John Kitzmiller [mailto:jkitz@xxxxxxxxxxxxxx]
Sent: Monday, March 25, 2002 3:03 PM
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] dmp0_8MM script on AW51E


We recently upgraded our AW51B to an AW51E.  I went to do a tape backup and
following the procedure that we have been using for years, got to the step
that checks for rst9 in the /dev directory.  It wasn't there so I did a boot
-r. When the box came back up I checked the /dev directory to see if the
device file was there and it still wasn't there.  

Checked my FoxDoc CD and noticed that on both D & E boxes that there were 4
devices listed for tape backups:  rst0, rst9, rst29, and rst36.  The only
one that was in my directory was rst36.  Tried running
/usr/local/add_periphs script and it still didn't add rst9.

Tried running mt -f /dev/rstX status on all of the rst entries in the /dev
directory and about half of them returned a response saying that they
reconized a 4mm tape including rst36.  Is there something about the E box
that it won't create rst9 or am I going to have to hack the dmp0_8MM script
to use a different rst device.


Jack Kitzmiller
International Paper
Sartell, MN
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
 

<><><><><><><><<><><><><><><><<><><><><><><><>

This e-mail and any files transmitted with it are the property of Americas 
Mining Corporation and/or its affiliates, are confidential, and are intended 
solely for the use of 
the individual or entity to whom this e-mail is addressed. If you are not a 
named recipient or otherwise have reason to believe that you have received this 
message in error, 
please notify the sender and delete this message immediately from your 
computer. Any other use, retention, dissemination forwarding, printing or 
copying of this e-mail is 
strictly prohibited.  Although this email and any attachments are believed to 
be free of any virus or other defect that might affect any computer system into 
which it is 
received, and opened, it is the responsibility of the recipient to ensure that 
it is virus free and no responsibility is accepted by Americas Mining 
Corporation and/or its 
affiliates for any loss or damage arising in any way from its use

This e-mail has been scanned and cleared by MailMarshal 
www.marshalsoftware.com

<><><><><><><><<><><><><><><><<><><><><><><><>
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: