On the AP20 host there is a durectory /usr/fox/tmplts There you will find you different CAD displays....CAD10, CAD20 etc. You can remove the button from the CAD10 in the display builder,,,or configure an access class in the display configurator. > -----Original Message----- > From: foxboro-bounce@xxxxxxxxxxxxx On Behalf Of oswald gomez > <oswaldgomez@xxxxxxxx> > Sent: Monday, January 26, 2004 5:55 PM > To: foxboro > Subject: [foxboro] display access > > Hi list, > > hi guys, can anybody help configure my displays to not allow the operators > to access to the "block detail" windows. I've noticed that in their > environment, they can totally modify any control loop by pressing the > buton "block detail". I'd like to stop this, so that changes could only be > done under the engineering environment. > > Is there any file I can look at? > > --------------------------------- > > Antivirus #8226; Filtros antispam #8226; 6 MB gratis > ¿Todavía no tienes un correo inteligente? > > > > _______________________________________________________________________ > This mailing list is neither sponsored nor endorsed by Invensys Process > Systems (formerly The Foxboro Company). Use the info you obtain here at > your own risks. Read http://www.thecassandraproject.org/disclaimer.html > > foxboro mailing list: //www.freelists.org/list/foxboro > to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join > to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave > -- No attachments (even text) are allowed -- -- Type: application/ms-tnef _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave