Re: [foxboro] dedit from a command window for FoxView displays

The command on Solaris is d_edit. And d_edit outputs to standard out =
(screen) so you have to capture the output yourself, like this:

# d_edit -R displayfilename > outputfilename

Duc


-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] =
On Behalf Of QUEIROLO OLIVERA, IGNACIO ESTEBAN
Sent: Tuesday, April 24, 2007 8:45 AM
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] dedit from a command window for FoxView displays

Hello all,
=20

I am trying to use dedit in FoxView from command line and I haven't had =
lucky. I have a telnet session with an AW51D and I am running the =
application in a sh environment. The command line I am using is:

# dedit -R <filename>

Is there something I am missing here? The idea is use dedit in a shell =
script to perform an automatic report of a selected list of files. I =
know from the B0193WG document that dedit generates a log file in the =
current directory but I don't have anything after I run it.

Any helps would be grateful.

Regards,

Ignacio Queirolo Olivera
Control Avanzado
Complejo Industrial Ensenada
Repsol YPF - Qu=EDmica
Av. Vergara Km 2,7 (B1925AZA) - Ensenada - Buenos Aires - ARGENTINA
Tel.: 54 221 429-8400 ext. 26481
Fax: 54 221 429-8400 ext. 26209
iqueiroloo@xxxxxxxxxxxxx <mailto:iqueiroloo@xxxxxxxxxxxxx>=20

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: