Re: [foxboro] changing color code object DM

Dirk,

Is it safe to assume you haven't used display conventions
(DspConventions editor)?

If you have its easy to change all displays with that tool, if not I
suggest you use conventions when you change each object one at a time.

Richard Wetton.....



-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of Dirk Pauwels
Sent: Thursday, 24 November 2005 8:15 PM
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] changing color code object DM

I need to change a color code on all of our Reactor displays. (using
display=20
manager, not foxview) Closed valve is now represented by color red,
needs to=20
be replaced with another color (red is generally alarm color). I don't
want=20
to go through each object one by one and change color code. I checked
the=20
dump file, but there's no color code indicated there. I can't change the

color palette file, that would replace the colors on all displays. Is
there=20
a way to change color codes per display using 1 command?

Thanks,

Dirk Pauwels - DCS/MOC coordinator
Engineering dept.
Hexion Specialty Chemicals
E mail: dirk.pauwels@xxxxxxxxxxxxxx
T.  +32.(0)3.570.95.97
F.  +32.(0)3.570.16.09
Mob. +32.(0)497.428.300

_________________________________________________________________
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: