Re: [foxboro] Windup in cascade configuration

  • From: "Hafez, Omar" <Omar.Hafez@xxxxxxxxxxxxxxxx>
  • To: "'foxboro@xxxxxxxxxxxxx'" <foxboro@xxxxxxxxxxxxx>
  • Date: Wed, 23 Feb 2005 07:04:34 -0500

Yes,
please check also the LIMOPT parameter; this parameter specifies the
unti-windup strategy.
Hope this will help.

Omar Hafez
Senior Lead Engineer
Invensys Engineering & Services-Egypt
T + 20 2 754 9280
F +20 2 516 8855
M +20 10 1833386
E-mail: omar.hafez@xxxxxxxxxxxxxxxx


-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx =
[mailto:foxboro-bounce@xxxxxxxxxxxxx] On
Behalf Of IQUEIROLOO@xxxxxxxxxxxxx
Sent: Wednesday, February 23, 2005 12:31 PM
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] Windup in cascade configuration

Hi folks,
=20

I have some questions about the cascade configuration of two PID =
blocks. In
case of clamping in the secondary block, what happens with the output =
of the
primary block?

For example, if the secondary block clamps at 50% output, I think that =
the
primary block should not keep integrating because in this a windup can =
occur
at its output.

If I am right, the anti-windup works when the BCALCO of the secondary =
block
goes to the FBK and BCALCI of the primary block. Do I need anything =
else to
prevent windup?

=20

Thanks in advance,

=20

Ignacio Queirolo Olivera

Control Avanzado

Complejo Industrial Ensenada

Repsol YPF - Qu=EDmica

Tel.: 54 221 429-8400 ext. 26481

Fax: 54 221 429-8400 ext. 26209

iqueiroloo@xxxxxxxxxxxxx <mailto:iqueiroloo@xxxxxxxxxxxxx>=20

=20



AVISO LEGAL:

Esta informaci=F3n es privada y confidencial y est=E1 dirigida =
=FAnicamente a su
destinatario. Si usted no es el destinatario original de este mensaje y =
por
este medio pudo acceder a dicha informaci=F3n por favor elimine el =
mensaje. La
distribuci=F3n o copia de este mensaje est=E1 estrictamente prohibida. =
Esta
comunicaci=F3n es s=F3lo para prop=F3sitos de informaci=F3n y no debe =
ser
considerada como propuesta, aceptaci=F3n ni como una declaraci=F3n de =
voluntad
oficial de REPSOL YPF S.A. y/o subsidiarias y/o afiliadas. La =
transmisi=F3n de
e-mails no garantiza que el correo electr=F3nico sea seguro o libre de =
error.
Por consiguiente, no manifestamos que esta informaci=F3n sea completa o
precisa. Toda informaci=F3n est=E1 sujeta a alterarse sin previo aviso. =


This information is private and confidential and intended for the =
recipient
only. If you are not the intended recipient of this message you are =
hereby
notified that any review, dissemination, distribution or copying of =
this
message is strictly prohibited. This communication is for information
purposes only and shall not be regarded neither as a proposal, =
acceptance
nor as a statement of will or official statement from REPSOL YPF S.A. =
and/or
subsidiaries and/or affiliates. Email transmission cannot be guaranteed =
to
be secure or error-free. Therefore, we do not represent that this
information is complete or accurate and it should not be relied upon as
such. All information is subject to change without notice.

=20
=20
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
=20
foxboro mailing list:             //www.freelists.org/list/foxboro
to subscribe:         =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin
to unsubscribe:      =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave
=20

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             //www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
 

Other related posts: