Frits, /dev/fb0 (and /dev/fb1 on dual headed boxes) are linked to the video drivers, so ls -l /dev/fb0 should show: lrwxrwxrwx 1 root root 10 Jan 13 08:57 /dev/fb0 -> fbs/cgsix0 B boxes normally had cgsix frame buffer (GX or Turbo GX video cards), although I commonly see CGthree cards in B boxes (probably migrated from A boxes). You can also browse the messages files: dmesg | egrep '(cgthree|cgsix)' to see your video cards. You're probably running both cards at 1152x900x76. To see the refresh rate dig into the output of: # prtconf -vp or, download the fbinfo script from Sun at: http://www.sunhelp.org/faq/progs/fbinfo In most cases you shouldn't have to set the video resolution. Default resolution is set by returned sense code according to the following: Code TGXplus(1) TGX(2) GXplus GX (LSC chip) ------------------------------------------------------------------- 7 1152x900x66 1152x900x66 1152x900x66 1152x900x66 6 1152x900x76 1152x900x76 1152x900x76 1152x900x76 5 1024x768x60 1024x768x60 1152x900x66 1152x900x66 4 1152x900x76 1152x900x76 1280x1024x67 1152x900x76 3 1152x900x66 1152x900x66 1152x900x66 1152x900x66 2 1280x1024x76 1152x900x66 mutant(3) mutant(3) 1 1600x1280x76 1152x900x66 mutant(4) mutant(4) 0 1024x768x77 1024x768x77 1152x900x66 1152x900x66 Setting B box video card resolutions is not trivial. D and E boxes have command line tools (m64config, ffbconfig and GFXconfig), but B boxes need changes made to the eeprom. To reset the resolution on the primary video card you can do: # eeprom output-device=screen:r1152x900x66 and reboot, or at the Forth toolkit ok> prompt: ok> setenv output-device screen:r1152x900x66 and boot. To set the second video card resolution, see the Sun Frame Buffer FAQ description at: http://www.sunhelp.org/faq/FrameBuffer.html#2b Regards, Kevin FitzGerrell Systems Engineer Foxboro New Zealand +64 9 573 7690 Quoting "Schouten, Frits JF" <Frits.Schouten@xxxxxxxxxxxx>: > Hello all, > > How can I find out, without popping the lid of the AW51b, what video > card is > installed? > I want to change the resolution. > > The AW is actively in use and I can't remove it to examine but the > screen > let the smoke out and I have to replace it with someting else. > I've tried a few CRT's but they indicate a too high refresh rate. > The Compaq LCD 1701 seems to do the job but only half. There is a black > vertical bar (3cm) on the left hand side. > > Once I've found out which card it is, how can I change the refresh > rate? > > Thanks, > > Frits Schouten > Process Computing Department > New Zealand Steel > Phone: +64 +9 375 8111 ext 5261 > Email: Frits.Schouten@xxxxxxxxxxxx > > > > EOM > > NOTICE - This message and any attached files may contain information > that is > confidential and/or subject of legal privilege intended only for use by > the > intended recipient. If you are not the intended recipient or the person > responsible for delivering the message to the intended recipient, be > advised > that you have received this message in error and that any > dissemination, > copying or use of this message or attachment is strictly forbidden, as > is > the disclosure of the information therein. If you have received this > message in error please notify the sender immediately and delete the > message. > > > > > ______________________________________________________________________ > _ > This mailing list is neither sponsored nor endorsed by Invensys Process > Systems (formerly The Foxboro Company). Use the info you obtain here at > your own risks. Read http://www.thecassandraproject.org/disclaimer.html > > foxboro mailing list: //www.freelists.org/list/foxboro > to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join > to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave > > _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave