Re: [foxboro] What causes System Alarms and What doesn't??
- From: "David Standerfer" <DStander@xxxxxxxxxx>
- To: <foxboro@xxxxxxxxxxxxx>
- Date: Mon, 03 Jun 2002 11:40:05 -0600
I successfully downloaded and installed this QF about a month ago and =
didn't have any problems. Back then we went ahead and replaced the =
suspicious CP pair, which were at HW rev. level G, with a pair of HW rev. =
K CP's. Since that time we have had another set of rev. G CP's exhibit the =
same problem where the backup CP goes into a continuous reboot cycle and =
never marries with the primary. We are now in the process of replacing all =
10 of our rev. G's with rev. K's. What a pain the neck. Please excuse my =
ranting.
Dave Standerfer
Agrium US Inc.
Kenai, Alaska
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
