Re: [foxboro] Westinghoouse IQ-1000 II

On Mon, Sep 30, 2002 at 06:21:28AM -0700, Balmer, Robert D. wrote:
> 
> Stan
> Do you have any information on how the protocol is set up?.. I was
> considering using a Modicon gateway we have to send this info through to the
> Foxboro.  That is if the Westinghouse modules can still be found somewhere.
> Thanks
> Robert Balmer
> 

I've got the book that came with the agteway. Fortunately we never had to
deal with the protocol at that level. Our solution uses a AB Fleixable
Interface Module (RB for short), and a PROM by a company called C&I systems
out of Milwaukee )sp) WI.

We put this in about 10 years agao, and it has worked flawlesly ever since.

If, by some chance you do come up with a gateway, and it does not have
manuals with it. email me, and I'll make a copy of ours (assuming I can
still find it :-)) for you.



-- 
"They that would give up essential liberty for temporary safety deserve
neither liberty nor safety."
                                                -- Benjamin Franklin
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: