Re: [foxboro] Westinghoouse IQ-1000 II

Stan
Do you have any information on how the protocol is set up?.. I was
considering using a Modicon gateway we have to send this info through to the
Foxboro.  That is if the Westinghouse modules can still be found somewhere.
Thanks
Robert Balmer

-----Original Message-----
From: stan [mailto:stanb@xxxxxxxx]
Sent: Monday, September 30, 2002 8:13 AM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] Westinghoouse IQ-1000 II



On Fri, Sep 27, 2002 at 12:52:26PM -0700, Balmer, Robert D. wrote:
> 
> I am trying to figure out a method of bringing the information into our
> Foxboro system from three Westinghouse IQ1000 II. Has anyone had
experience
> with these meters?

We've got IQ100 of an older generation here. At least on them, they speak a
proprietory protocol. Westinghouse sells (oe sold) a gateway to that
netwrok, conceptually similar to an AB 177-KF2. We then talk RS-232, using
that protocol to them. I'm not certain how you would get this done in IA.

Hope that helps. BTW on our IQ's the network module is an add on peice for
each IQ.

-- 
"They that would give up essential liberty for temporary safety deserve
neither liberty nor safety."
                                                -- Benjamin Franklin
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
 

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: