Re: [foxboro] WP70 image question

If the machines are the same you could Ghost them and not have to change
anything.  Just dump the image to the new box.


-----Original Message-----
From: Ken.E.Moore@xxxxxxxxxxx [mailto:Ken.E.Moore@xxxxxxxxxxx]=20
Sent: Thursday, September 30, 2004 8:32 AM
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] WP70 image question



Hi List,

I have several WP70B's (ethernet only), they are all configured exactly
the same. One of them failed yesterday. Rather than re-installing I/A on
the replacement box. Can I just make an image of one of the other
machines hard drive, load the image on the new machine, and then change
the letterbug? If so, where would the letterbug be changed? I know that
I'll have to change the network settings, machine name, IP addresss,
etc... But I don't know where else.

Thanks,

Ken Moore
NSCC-Wdrf plant



______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email=20
______________________________________________________________________
=20
=20
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
=20
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin
to unsubscribe:      =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave
=20
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: