Re: [foxboro] WP51B won't communicate

Peform:
        uname -n      ( Do you get that WP's letterbug)

        fist the station from itself  (do you get the correct NSAP address
for that box)

        what are the led's of the DNBI? (any blinking led's)  (one blink or
2 blink)

what is in the /etc/hostname.le0  file
what is in the /etc/nodename    file

ifconfig -a       (what are the results)

-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On
Behalf Of Ajay.Tathgir@xxxxxxx
Sent: Friday, February 11, 2005 2:15 AM
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] WP51B won't communicate





Hi! All

I have a WP51B which won't communicate on the nodebus. It does boot up,
without any error messages, but that's it.

If I do a fist, under error I get "Not found (-1)".

Where do i start looking, is it a le0 problem, or a serial port ?


Thanks & Regards

Ajay Tathgir

Reliance Industries Limited
Mumbai - India

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
 

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: