Most of the time that we have had boot problem like this, it has been a bad memory card. I would start there. Joe Gale DCS Administrator Boswell Energy Center Minnesota Power Cohasset, MN email: jgale@xxxxxxxxxxx -----Original Message----- From: Ajay_Tathgir@xxxxxxx [mailto:Ajay_Tathgir@xxxxxxx] Sent: Friday, July 19, 2002 7:40 AM To: foxboro@xxxxxxxxxxxxx Subject: [foxboro] WP51B Importance: High Hi folks We have a WP51B which refuses to boot up. After a power recycle gives Memory Address not aligned & comes back to ok prompt. On giving boot it terminates with message Interrupt 15. I have checked the env params via printenv, look like ok to me. To be sure I have compared them to alive 51B box also. Any ideas welcome. Faster the better. Thanks & Regards Ajay Tathgir Reliance Industries Limited Mumbai - India _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: http://www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: http://www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave