Re: [foxboro] WP20 alarm problem

Particularly "dm_recon" ; This utility resides in /usr/fox/cs
(I checked on my AP20)
It is a standard part of th IA system where Device Monitor is
loaded.

W C Ricker
FeedForward, Inc.

-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx
[mailto:foxboro-bounce@xxxxxxxxxxxxx]On Behalf Of joen
Sent: Thursday, October 18, 2001 6:35 AM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] WP20 alarm problem



Gentlemen, thank your for your replies on my problem
However, upon your suggestions here is the progress:
* Claus Zespel: after editing compound parameters GRPDEV (and checking the
entry) the alarms keep hiding
* HankMatic: rebooting after above step gave no change
* Marcel Sieling: there is no vxmon tool in our station, unfortunately
* Peter Bruley: i could not find dm_recon command in our station; is it
standard tool?
Once again, would you please give me clue on how to tackle this (the easy
way, i expect)
Thank you in advance
Await your generous valuable expertise comments
Best regards,

JM Saputra
>

 
 
___________________________________________________________________
This list is neither sponsored nor endorsed by The Foxboro Company.
Use the information obtained here at your own risk. For disclaimer,
see http://www.thecassandraproject.org/disclaimer.html#maillist

list info:   http://www.freelists.org/list/foxboro
subscribe:   mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

 
 
___________________________________________________________________
This list is neither sponsored nor endorsed by The Foxboro Company.
Use the information obtained here at your own risk. For disclaimer,
see http://www.thecassandraproject.org/disclaimer.html#maillist

list info:   http://www.freelists.org/list/foxboro
subscribe:   mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: