Re: [foxboro] WP follow up

I would advise, just to be sure, that you set all of the install parameters
in SysDef for that Workstation to DONE and run a comittal on it.  This will
refresh any system files that may be lingering on the replaced drive with
fresh ones and do no harm to any already installed components.
----- Original Message ----- 
From: "Brian Long" <blong@xxxxxxx>
To: "Foxboro" <foxboro@xxxxxxxxxxxxx>
Sent: Wednesday, April 21, 2004 8:03 AM
Subject: [foxboro] WP follow up


> As a follow up to my earlier question about WP's, the box, node and system
> as a whole seem to be just fine.  I verified that the hostname.le0 was the
> correct letterbug and it was, (no duplicate IP's).  I'm planning on
keeping
> what I've got just to see if any problems arise.  All functions that I can
> think of work just fine.
> Thanks,
> Brian Long
> E&I Superintendent
> Green Bay Packaging
> Arkansas Kraft Division
>
>
>
>
> _______________________________________________________________________
> This mailing list is neither sponsored nor endorsed by Invensys Process
> Systems (formerly The Foxboro Company). Use the info you obtain here at
> your own risks. Read http://www.thecassandraproject.org/disclaimer.html
>
> foxboro mailing list:             http://www.freelists.org/list/foxboro
> to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
> to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
>
>


 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: