Re: [foxboro] WP Hanging problem

 
 
Here's a quick test:

At the OpenBoot prompt ('ok') type "watch-clock". The screen will read
the real time clock and display the ticking on the screen. If it fails
or increments erratically, then there's a good chance that you need an
NVRAM. Otherwise, you may be in store for a new motherboard and/or CPU.
You might even consider exchanging the whole thing for a refurbished
Ultra 5/10.


 
 
Thank you,

Ken Heywood
Calibration Laboratory Manager

401 Industrial Drive
Plymouth MI 48170
http://www.processcontrolservices.com
KHeywood@xxxxxxxxxxxxxxxxxxxxxxxxxx
Telephone: 734-453-0620
Facsimile: 734-453-6008
Wireless: 508-241-2040
PCS means Providing Customer Satisfaction
 
--------------------------------------------------------------------------
PROCESS CONTROL SERVICES, INC. DISCLAIMER
This message (and any associated files) is intended only for the use of the 
individual or entity to which it is addressed and may contain information that 
is confidential, subject to copyright or constitutes a trade secret. If you are 
not the intended recipient you are hereby notified that any dissemination, 
copying or distribution of this message, or files associated with this message, 
is strictly prohibited. If you have received this message in error, please 
notify PCS immediately by replying to the message and deleting it from your 
computer. Messages sent to and from PCS may be monitored.

Internet communications cannot be guaranteed to be secure or error-free as 
information could be intercepted, corrupted, lost, destroyed, arrive late or 
incomplete, or contain viruses. Therefore, we do not accept responsibility for 
any errors or omissions that are present in this message, or any attachment, 
that have arisen as a result of e-mail transmission. If verification is 
required, please request a hard-copy version. Any views or opinions presented 
are solely those of the author and do not necessarily represent those of PCS.
--------------------------------------------------------------------------
 
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of waseem ghani
Sent: Friday, November 14, 2008 8:38 AM
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] WP Hanging problem

Dear Experts
We are experiencing problem with one of our WP51D Ver 6.5 stations
The following error is noted when WP hangs or reboot by itself.
" panic [cpu0] thread = 0x60354040

  pci108e, 50001: PBM generated system error

  pci108e, 50001: PBM received target = abort

 pci108e, 50001: PBM generated system error

  pci108e, 50001: PBM received target = abort

  psi0 ; PCI SERR

   Level 14 Interrupt
   Ok"
Please advise us the solution

Regards
Waseem Ghani


 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
 

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: