Re: [foxboro] WP Hanging problem

Just guessing, but the initial error says its a CPU problem. You might
try reseating it. I haven't experienced this error on a WP51D, but have
on a AW51E and it required CPU replacement. The next set of errors (PBM)
may be referring to memory (not sure), so I would reseat memory SIMMS
also. Neither of these suggestions cost money and are quick to
implement, so they are worth a shot. 

Jack Easley
Sr. I&C Technician
Luminant Power, Martin Lake Plant
Phone 903.836.6241
jack.easley@xxxxxxxxxxxx
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of waseem ghani
Sent: Friday, November 14, 2008 7:38 AM
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] WP Hanging problem

Dear Experts
We are experiencing problem with one of our WP51D Ver 6.5 stations
The following error is noted when WP hangs or reboot by itself.
" panic [cpu0] thread = 0x60354040

  pci108e, 50001: PBM generated system error

  pci108e, 50001: PBM received target = abort

 pci108e, 50001: PBM generated system error

  pci108e, 50001: PBM received target = abort

  psi0 ; PCI SERR

   Level 14 Interrupt
   Ok"
Please advise us the solution

Regards
Waseem Ghani


 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
 

Confidentiality Notice: This email message, including any attachments, 
contains or may contain confidential information intended only for the 
addressee. If you are not an intended recipient of this message, be 
advised that any reading, dissemination, forwarding, printing, copying
or other use of this message or its attachments is strictly prohibited. If
you have received this message in error, please notify the sender 
immediately by reply message and delete this email message and any
attachments from your system. 
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: