Re: [foxboro] WG: CP60 UCM connection

Klaus - We have FIOs instead of UCMs, but this may be similar.  Here's
an example of our Al Premix sequence for letterbugs and ECBs.  If you
have redundant DCM10Es, then use the same letterbug in each one, and the
last two characters have to be 00 (zeros).  Also check out B0193RC.

CP60FT------DCM10E--FBP11---I/O Cards
CPALP1------ALP000--ALP001--ALP011,ALP012,...
CPALP1_ECB--ECB110--ECB49---ECB41-44s,...

Daniel Klebba
ATK Launch


-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of Schaedler, Klaus
Sent: Tuesday, September 19, 2006 12:44 AM
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] WG: CP60 UCM connection

=20
=20

Hi list,

=20

does anybody have a system where an UCM is

connected via DCM10E to a CP60.

I would be interested in the an ECB chain example

CP60-DCM10E-FBP11

=20

Best regards

Klaus=20


=20
=20
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
=20
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin
to unsubscribe:      =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave
=20
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: