Re: [foxboro] Version8 Training

I know we went to the 2200 V8 Equipment Maintenance and the 2210 V8 Config and 
Software Maintenance. 
 
2200 great class, I learned a lot about our new mesh system coming of an old 
v4.3 B box system.
 
The 2210 class was for IACC not ICC which we where staying with. The sales guys 
goofed this one but the instructor modified the class a bit so we could work on 
ICC, as there where I think four of us in this boat. We didn't get that much 
out of this class as we had been already using ICC.  
The 2211 class looks like a switch class. Not much in the day to day admin 
stuff. More of standard switch protocol info. We have only been into our switch 
config on the start-up/cut-over. once we came up we have not had to touch the 
config, Sys Manger is all we have needed, all though it has only been running a 
year now. 
 
I would like to see some more on this topic. We did waste a few days in Houston 
on this one. We are looking for a Admin type class to get to, but with all the 
new changes which one is the 90% solution?
 
 
Thank you for your support.
Larry Mantei
Process Control 
Fairbanks Gold Mining
PO Box 73726
Fairbanks, Alaska 99707-3726
(907)488-4653 ext. 2306

larry.mantei@xxxxxxxxxxx 



>>> "Redmond, Sean S" <Sean.Redmond@xxxxxxxxxxxxxxxxxx> 7/6/2009 12:12 PM >>>
Hi Everybody,

I was wondering if anyone has been on a version 8 course for people who
have had experience with I/A, and what they thought of it.  Really I am
after a system admin type course for V8, which explains how to monitor
and fault find your system, a bit like those alliance courses Foxboro
used to run.  This course 2211 MESH Configuration & Maintenance Workshop
seems ok, has anyone done this, thoughts?

Sean,
NZ Steel





NOTICE - This message and any attached files may contain information that is 
confidential and intended only for use by the intended recipient. If you are 
not the intended recipient or the person responsible for delivering the message 
to the intended recipient, be advised that you have received this message in 
error and that any dissemination, copying or use of this message or attachment 
is strictly forbidden, as is the disclosure of the information therein. If you 
have received this message in error please notify the sender immediately and 
delete the message.


_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html 

foxboro mailing list:             http://www.freelists.org/list/foxboro 
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join 
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave 


 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: