Re: [foxboro] Upgrade PW(VENIX)

You are right, he would also have to maintain a boot host on the Nodebus
side.

-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of Jeremy Milum
Sent: Monday, July 23, 2007 5:04 PM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] Upgrade PW(VENIX)

On 7/23/07, Jack.Easley@xxxxxxxxxxxx <Jack.Easley@xxxxxxxxxxxx> wrote:
> upgrade. However, it is possible to retain your old CPs on your old
> NODEBUS via ATS connection to a new MESH P92.

currently though he would not be able to boot a CP10 across an ATS w/ a
MESH AW

but I agree the CP10's need to be upgraded....
=20
=20
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
=20
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin
to unsubscribe:      =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave
=20
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: