Re: [foxboro] Unack Alarms

You can use this to check the contents of the annunciator status.

pref  -LBUG dmcmd "annun  -1  -1  -1"           # open  debug mode
pref  - LBUG aacmd "dump lite_assign"           # dump the lite assign in a
file AAtab.asg

file looks like:

compound        block           status  panel   key     status

44RB_UCM8       44LC336         0x0000  2       16      ACKED
44RB_UCM8       44LT001         0x0000  2       14      ACKED

pref - LBUG aacmd "dump lite_state"             # dump lite state in a file
AAtab.cnt

file looks like:

# ANNUNCIATOR LIGHT COUNTS

Panel   Key     COUNT NUM               STATE 
2       6       0       26      4       OFF 
2       7       0       11      4       OFF 
2       8       0       17      5       FLASH 
2       9       0       30      4       OFF
2       10      0       27      4       ON

pref - LBUG dmcmd "annun -2 -2 -2"              # close debug mode

Regards,

Patrick

Patrick Den Haese
Invensys Systems N.V./S.A.



-----Original Message-----
From: Jaime Claramunt R. (Inforsa) [mailto:jclaramunt@xxxxxxxxxxxxxxx] 
Sent: Tuesday, 29 July, 2003 15:00
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] Unack Alarms 


Hi List,

Does anybody knows the way to retrieve all Unacknowledged Alarms from system
? I mean, sometimes operators erase alarm lists from Alarm Manager and I
loose some alarms returned from alarm state but unacknowledged. This cause
annunciator keyboards blink but we can't find why.... Does alarm manager
"grep" this ? or are there some script to do it ?

Thanks guys
Bye

Jaime Claramunt
Automation Engineer
INFORSA Paper Mill
CHILE
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at your
own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
 
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: