Re: [foxboro] Thin Clients on DM

As far as the fonts is concerned, I would use a font server on the AW
and on the Xterm specify where the additional fonts can be found.
Font servers run normally on port 7000, if I'm not wrong.
Just read your man pages on xfs.

Cheers,
Frits.

-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of John.Spigel@xxxxxxxxxxxx
Sent: Friday, 1 December 2006 6:14 AM
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] Thin Clients on DM


Hello list members, I am attempting to setup thin clients as X-terminals
on the IA system and am aware that there has been some success using
Wyse 5150SE terminals. I have several questions. Has anyone been
successful in loading the font files local on the thin client and how
was this done? I intend to copy them as compiled on the IA. Has a custom
image been created allowing the files to be kept locally? And what if
any setup changes are required in the IA in Solaris 8 for using as a
font server? Also, are any changes required on the IA itself in the
display manager config files that would be different from using Exceed?
I have trial units, Wyse S50, NTA 6020A, and Neoware all with linux
distribution.  Another difficulty is getting touchscreens to work.  The
units allegedly support both Elo and some support 3M microtouch.
I know the answers are out there....
Thanks!
John Spigel
Staff Engineer, Clariant Corporation

=20
=20
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
=20
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave
=20


=0A=0ANOTICE - This message and any attached files may contain informatio=
n that is confidential and intended only for use by the intended recipien=
t. If you are not the intended recipient or the person responsible for de=
livering the message to the intended recipient, be advised that you have =
received this message in error and that any dissemination, copying or use=
 of this message or attachment is strictly forbidden, as is the disclosur=
e of the information therein. If you have received this message in error =
please notify the sender immediately and delete the message.
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: