Re: [foxboro] Tape drive problem

Try writing to rst4 or rst0 , if you can write to either one , then the
sofware link to rst9 disappeared , you'll have to relink it=20

-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of Burnham, Rob C.
Sent: Wednesday, October 26, 2005 6:15 AM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] Tape drive problem

Should it be tar cvf /dev/rst5...

-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx
[mailto:foxboro-bounce@xxxxxxxxxxxxx]On Behalf Of Ali Ahmed
Sent: Wednesday, October 26, 2005 3:14 AM
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] Tape drive problem


Hi all,
We have one tape drive DDS3 attached with our AW51E. Recently I have
foun=3D d=3D20 that tape drive is not working. I changed the drive with =
a
new tape drive=3D =3D20 and rebooted the AW but the problem is same. I
checked the power and SCSI=3D =3D20 cable connections and found them =
o.k.
The Tape drive hard ID is 5. The ta=3D pe=3D20 drive is visible by =
running
probe-scsi-all command at ok prompt.
I checked /dev directory for rst5 and rst9 both of them are there. I run
=3D the=3D20 command 'add_periphs' in VT100, the command executed
successfully but when I try =3D to=3D20 tar some files in the tape using

tar cvf /dev/rst9  /opt/menus/d1/*

it returns the following message

tar: /dev/rst9: No such device or address

Is this a software problem? If any one have the idea, kindly advise.


Rgds,
Ali Ahmed Zahidi
Pakistan Refinery Ltd.

_________________________________________________________________
Don't just search. Find. Check out the new MSN Search!=3D20
http://search.msn.com/

=3D20
=3D20
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
=3D20
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3Djoin
to unsubscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3Dleave
=3D20


=20
=20
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
=20
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin
to unsubscribe:      =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave
=20
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: