Re: [foxboro] Sys Def

There may not be a direct "fool proof" way.
If you have the last committal (#101), it can be imported to make a
partially correct cfg file. This can be fine tuned with info from sldb, hldb
and IIF.prm files. It would be better to leave the FBMs out of the config
and rather rely on the ECB info. from CP SaveAlls.
Regards,
Sumitava
----- Original Message -----
From: "Priya Babu" <srisiva@xxxxxxxxxxxxxxx>
To: <foxboro@xxxxxxxxxxxxx>
Sent: Monday, April 29, 2002 7:14 PM
Subject: [foxboro] Sys Def


>
> Hi List,
>
> I doubt my sysdef is not representing my existing system configuration. Is
> there any way to build the "As-Built" system defnition from the I/A
system?
>
> Regards,
>
> Sivanath Babu
> Automation Engineer
> Abu Dhabi Oil Refining Co.
>
>
>
>
> _______________________________________________________________________
> This mailing list is neither sponsored nor endorsed by Invensys Process
> Systems (formerly The Foxboro Company). Use the info you obtain here at
> your own risks. Read http://www.thecassandraproject.org/disclaimer.html
>
> foxboro mailing list:             http://www.freelists.org/list/foxboro
> to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
> to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
>
>

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: