Re: [foxboro] Siemens

Ezio,

By the past (3 years ago) we had connected a SIEMENS S7-300 with ET200 =
to I/A using FBM224.
It was quite easy to connect and configure. Only problem was bits and =
words conversion-configuration from/ to siemens.
There is some pre-programmed configuration( FBM224 parameters supplied =
by Invensys : PKINGP for ex in PAKIN block) but for us, none of them =
work. So we had to re configure every modbus blocks, one by one.
But since it has been putten in production, we never heard about it ! =
FBM224 seems to be very reliable.
You could may be develop your question ?

Regards ,

JCM

-----Message d'origine-----
De : foxboro-bounce@xxxxxxxxxxxxx
[mailto:foxboro-bounce@xxxxxxxxxxxxx]De la part de
ezio.a.scandola@xxxxxxx
Envoy=E9 : Monday, March 31, 2008 09:18
=C0 : foxboro@xxxxxxxxxxxxx
Objet : [foxboro] Siemens


Is there someone who has experience connecting a Siemens ET200S CPU to =
an=20
I/A by a profibus or to a Siemens PLC that has an I/O card, through an=20
FBM223?
Regards, Ezio

=20
=20
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
=20
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin
to unsubscribe:      =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave
=20

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: